Mechanical Engineers

                      Mechanical Engineer –SS001-08

Personal Bio- Data

PROFESSIONAL QUALIFICATION: B.Sc. B.E (Mechanical Engineering) Graduated in January1978 with first division from University of Engineering and Technology Peshawar, Pakistan. (Member Pakistan Engineering Council  Registration # 73–Engg.Mech-2190):COMPUTER LITERACY: Good Command On   Microsoft Word & Microsoft Excel. FoxPro. LANGUAGES PROFICIENCY:Can read, write and speak English, Russian, Arabic, Urdu, Hindi & Afghani . I have a total of 25 yeas experience in the field of Mechanical Engineering. Have worked on various construction projects like Pakistan Steel Mills Complex, Indus Super Highway Board, Dr. A.Q. Khan’s Nuclear Research Laboratories, Mazari Oil & Gas Facility and Sawan Gas Field development in Pakistan.In the State of Kuwait and Kingdom of Saudi Arabia, I have worked with Arabian American Oil Company in their refineries,Gas plants and bulk plants, both in construction as well as in HSE Department. Also worked with SABIC and   Al-Rajhi Group of companies at Managerial positions.Presently working in Muscat, Sultanate of Oman with Al-Hassan Group of Companies as HSE Advisor for Petroleum Development Oman projects, a subsidiary of Shell international exploration & production, Holland.PROFESSIONAL EXPERIENCE: AL-HASAN ENGINEERING COMPANY, MUSCAT SULTANATE OF OMAN .Duration:November2003. Till date ..Client:Petroleum Development Oman,(PDO) :Project:Construction of 14’’ Dia. And 16’’Dia. Under ground GRE lines 35Km long for Thuleilat water injection phase II project at Marmul. Construction of 6” Diameter carbon steel gathering line 7 Km from Marmul A to Marmul Main Pumping Stataion.  Installation of fiber- optic cable for communication among stations. Position:HSE ADVISOR :PIPELINK CONSTRUCTION (PRIVATE) LIMITED, KARACHI PAKISTAN. Duration: August 2001 to October 2003. Main Contractor:Clough Engineering (Australia) Limited. Karachi Client:OMV (Austria )Ltd. Project: Sawan Gas Field Development Project. # 4672Installation of 20” Diameter carbon steel under ground Sale gas Pipeline (Transmission line) 50 kilometers and 8”, 10” Diameters Duplex stainless steel Flow lines 100 kilometers  from various  wells to central processing plant.Testing and commissioning of the pipeline. Position:PROJECT MANAGER. :Client:B.P. Exploration & Production Inc. .Pakistan. Project :Mazari Oil & Gas  Facility Upgrade Job # 134 Installation of 8/10/18’’ Diameter carbon steel Pipeline about 4 kilometers inside the plant Installation of flare stack, knockout drum, IP / AG Scrubbers, Gas compressors, glycol contactor, regenerator and cooler, flash separator and control panels. Commissioning of new systems. Position:H.S.E.Q. MANAGER.AGAP ARABIA LTD & NATIONAL ENGINEERING SERVICES AND MARKETTING LTD SAUDI ARABIA. Duration:June 1998 to June 2001.Main Contractor:Technip ItalyClient:Saudi Arabian American Oil Company (Aramco) Project :Replace electric generators at Abqaiq plants Erection and installation of a fullfledged. Power house comprising of 4 combustible gas turbinegenerators( CGTG) with four heat recovery steam generators (HRSG) on turn key basis. Position:SENIOR SAFETY OFFICER :Main Contractor: Saudi Arabian Bechtel Company Ltd.  Saudi Arabia Client: Saudi Saline Water Conversion Corporation (Swcc)   Project : Design & installation of central air conditioning system and     automatic fire fighting system for their new desalination plant at Shuaiba, Saudi Arabia.Position:PROJECT  ENGINEER MECHANICAL :Client:Saudi Arabian Mobil Refinery(SAMREF)/ YANPET  at Yanbu..Project:Various Short Form Contracts For Plants Upgrade Position:PIPING  ENGINEER Client:Saudi Aramco  Rabigh Refinery ..Project:Kerosene and Naphtha Upgrade Project .Installation of 10 kilometer 8 and 12 inch stainless pipeline inside the plant for kerosine       and naphta. Relocation of two heat exchangers and pumps. Commissioning of the new system. Position:SENIOR HSE ADVISOR:Client:Saudi Arabian American Oil Company (Aramco) Project:upgrade safety and fire fighting facilities at duba and tabuk bulk plants, saudi arabia.construction  of firewater tanks and installation of pumps and necessary  rtr piping, sprinklers, hydarnts and control panels. Position:LOSS PREVENTION ENGINEER Client:Arabian Petrochemical Company Ltd (Petorkemya) Project:Pvc Plant Upgrade Project. Installation of vinyl monomer vessel, piping and control units. Commissioning of the plant. Position:PROJECT CO-ORDINATOR .Client:Al-Jubail  Petrochemical company (KEMYA)PROJECT Project:H.D.P.E. Plant upgrade Installation of pumps, tanks and piping inside the plant. Position:PROJECT  ENGINEER MECHANICAL Company:Al-Rajhi  Company  For Construction  Materials K.S.A. Duration:(Jan.1991-Nov.1997)Projects:Construction of structure and skids for various plants and ware-houses for Al-Rajhi Group of Companies. Maintenance of workshop equipment like lathe, milling, planner, grinders, presses, bending machines, overhead cranes, gantry, forklifts, loaders, generators and other tools, tackles etc.Manufacturing of air conditioners and desert coolers. Manufacturing of wire mesh for temporary fencing. Position:WORKSHOP MANAGER ..Company:Faisal S.Al-Naimi Establishment ..Duration:(Jan. 1989-Nov.90)Client:Chiyoda Petro-Star Ltd, Yanbu  K.S.A. Project:Luberef  Expansion Project ..Position:SAFETY ENGINEER  .Company:Al-Taif company for operation , maintenance and contracting Ltd, Riyadh K.S.A. Duration:Jan. 1987-Dec.88..Client:Saudi Youth Welfare Club Project:Construction of Al-Khaleej sports club at Seyhat &Re-construction of Dammam stadium Maintenance of workshop equipment like lathe, milling, planner, grinders, presses, bending machines, overhead / tower cranes, gantry, forklifts, loaders, graders, dump trucks concrete transit mixers, pumps, compressors, generators, jack hammers, hiltis, pumps and other tools, tackles etc. Maintenance of residential buildings and offices utilities units like HVAC systems, room heaters, water coolers, geysers, flood lights towers, sanitary and plumbing systems. 

Position:WORKSHOP MANAGER .Duration:Jan.1983-Dec.1986:Company:Pakistan Steel Mills Corporation Ltd, Karachi. Pakistan Client:Tiazh-Prom-Export Moscow, Former U.S.S.R. Project: Construction Of Pakistan Steel Mills Complex :Obtained on the job training for assembling and commissioning of Belarus tractors, bulldozers, loaders at USSR. Worked as deputy manager in workshop for assembling / commissioning of tractor bulldozers, loaders, other heavy equipment. Was also looking after the service and maintenance of these equipment during operation. Worked in Metallurgical Repairs and Heat Treatment Shop as Deputy Manager and was responsible for construction of heavy industrial units and spare parts required during the capital repairs of the Steel plant.

Position : Joined as Assistant Executive Engineer and then promoted to The post of  Deputy Manager.

Duration:Feb.1978 – Dec. 1982 Company:National Highway Authority Client:Offermat Damat, France

Project:Indus Super Highway 1000 Km.ConstructionWorked as Mechanical Eengineer with the responsibilities  of repair

and maintenance of large fleet of construction equipment like road rollers,dozers,loaders,scrapers, excavators, crushing

plants, precoaters, asphalt pavers  plants and vehicles. Position: Mechanical Engineer Workshop.

MAJOR RESPOSIBILITIES AS A PROJECT MANAGER

Close co-ordination with client  Project correspondence comprising of progress reporting, task risk assesments, procedures for various activities like welding, open cut, thrust boring rigging etc. Insepction request form submittals 24 hours in advance for all line related activities Planning of daily work as per construction schedule 24 hours in advance. Consumables demands and acknowledgement of receipt.Two days look ahead plan submittal and it’s implementation Callibration of gauges and psv and recorder for all hydro-testing Water sample testing through laboratory, for hydro-testing R.t. requests submittals R.t. reports

receipt and preparation of weld maps and their verification by client. Arrangements for all project activities and ensuring constant supervision.Inspection of all quality documents on daily basis Corrective actions for ncr and quality alerts / hse default and their closing asap. Punchlist preparation and completion of the punchlist items Co-ordination with landowners and taking corrective actions for better community relations. Cordination with land department for water courses and canal crossing Coordination with client / rig authorities for open road cuts etc. Practical hazard identifications, risk assesment and controls for new facility MAJOR RESPOSIBILITIES AS A MECHANICAL ENGINEER: Scheduling and execution of various construction activities. Schedule maintenance and repair of plants equipments like generators, compressors, boilers, heat exchangers,  fin fan units, diesel and petrol  engines, vehicles , construction equipments hvac and plumbing / sanitary systems.Inspection and load testing of cranes, rigging gears. Installation of plants, piping inside plants and cross-country pipelines Commissioning of various plants and refineries equipment .B.o.q. preparation and material takeover for various projects.Arrangement for recovery of breakdown vehicles / equipments .Spot purchasing locally available spares. Development of not available spares through local vendors.Operation / maintenance of large fleet of vehicles, roadconstruction equipment like rollers, dozers, scrapers, graders, loaders, excavators, dumpers and big plants like crushing plants, asphalt plants. Quality control of various products at local vendors facilities. MAJOR RESPONSIBILITIES AS H.S.E. EXECUTIVE :Lead initiative to enhance consultant and contractor hse performanc.Implement and assure achievement of corporate and pakistan hse strategies, key performance indicators and procedures.Develop and implement facility hse monitoring plan. Monthly hse statistics and trend analysis recording & submittal to client. Implement and monitor accident and incident notification and investigation procedures and corrective actions. Develop and manage audit programmes to monitor compliance with corporate and statuary hse requirements Provide specialist advice to line management teams and subcontractors as and when required and regularly disseminate hse information. Audit hse system effectiveness, develop solutions and provide training to achieve and record enhanced level of employees competency. Assure compliance with occupational health requirements incorporating field and corporate medical advice. Hazard and effects management system application for all activities. Safety induction of all levels of employees on every project. Hazard identification plan, write-up for all projects. Training of various tradesmen for proper use of all sorts of tools and special safety gears. Indoctrination of all employees for recognizing of health, safety and environmental hazards. Controlling of hazards through stop. VARIOUS SAFETY AND MANAGEMENT COURSES ATTENDED :8 safety golden rules course at british petroleum head office, karachi. Task risk assesment course at british petroleum khaskheli, badin. Work permit receiver’s course at rabigh refinery, saudi arabia. Hazard recognition course at rabigh refinery, saudi arabia. Hydrogen sulphide awareness and escape course at pdo training centre nimr, oman. Hydrogen flouride safety course at samref yanbu, saudi arabia. C.p.r. course at abbott laboratories karachi, pakistan. Fire fighting training at arabian petrochemical company, jubail, s. Arabia. Toxic chemical handling course at glaxo laboratories pakistan. Actual fire fighting and controlling at azoctalsteel plant, ukraine, ussr. Problem solving and decision making course at p.i.m., karachi. Iso-9000 awareness and understanding course at Karachi First aid course at sawan, through saint. John’s ambulance services, arranged by clough engineering field doctors. H.s.e. induction senior level course at pdo traiing center nimr sultanate of oman. Supervising safety course at pdo traiing center nimr sultanate of oman. Permit to work signatories course at pdo traiing center nimr sultanate of oman. Fire warden course at pdo traiing center nimr sultanate of oman. Incident investigation and reporting course at pdo traiing center nimr sultanate of oman. Basic life saving course at pdo traiing center nimr sultanate of oman. Basic gas teting course at pdo traiing center nimr sultanate of oman. Enhanced safety supervision workshop at pdo traiing center nimr sultanate of oman Occupational road show attended at pdo traiing center nimr sultanate. of oman.

……………….………………………

Mechanical Engineer –SS002-08

  KHAN, FARRUKH SHARIF

EDUCATIONAL QUALIFICATION: Degree of Bachelor of Engineering (Mechanical) from NED University of Engineering & Technology, Karachi. (Pakistan). Year of passing.1995 SKILLS: Excellent skills of operation, maintenance, installation and commissioning of plant equipments specially HVAC systems in industrial, commercial & healthcare buildings. FIELD EXPERIENCE: Currently working in AGA KHAN UNIVERSITY HOSPITAL in the capacity of MECHANICAL ENGINEER since June’ 04 with following responsibilities: Review of Design Drawings, Specifications and BOQ from consultants Supervision of all Mechanical & HVAC works at site according to drawings & specifications Review of submittals from different vendors for owner furnished material and contractor supplied items Installation of all mechanical & HVAC equipments Testing & Commissioning of the system Handing over to Maintenance Department Worked in GETZ PHARMA PAKISTAN (PVT) LTD. in the capacity of UTILITY ENGINEER for six months (Nov’03 to June’04). Responsibilities included Operation & Maintenance of Chillers, Cooling Towers, Air Handling Units, Boilers, Air Compressors, Air Dryers, Split A/Cs, Window A/Cs, reparation of Maintenance schedules and reports Keep record of inventory for spare parts and consumable items Worked in AGA KHAN UNIVERSITY HOSPITAL in the capacity of AIR-CONDITIONING ENGINEER for two years (Oct’01 to Nov’03). Responsibilities included Operation & Maintenance of Chillers, Cooling Towers, Pumps, Air Handling Units, Fan Coil Units, Air Compressors, Air Dryers, Ultra Low Freezers, Split A/Cs, Window A/Cs etc. Operation of Siebe BMS system Operation of Water Treatment system Preparation of Maintenance schedules and reports Keep record of inventory for spare parts and consumable items Worked in BARRETT HODGSON PAKISTAN (PVT) LTD. in the capacity of  EXECUTIVE ENGINEER for three years (Feb’ 99 to Sept’01). Responsibilities included Operation & Maintenance of Chillers, Cooling Towers, Pumps, Air Handling Units, Fan Coil Units, Boilers, Air Compressors, Air Dryers, De-humidifiers, Split A/Cs, Window A/Cs etc. Operation of Siebe BMS system  Operation of Water Treatment system Preparation of Maintenance schedules and reports Keep record of inventory for spare parts and consumable items Worked in NATIONAL ENGINEERING SERVICES in the capacity of SITE ENGINEER for four years (Jan’95 to Feb’99). Responsibilities included: Review of Design Drawings, Specifications, BOQ from consultants Supervision of all Mechanical Works at site according to drawings & specifications Co-ordination b/w MEP contractors to resolve on-site issues Installation of all mechanical & HVAC equipments Testing & Commissioning of the system Handing over to Maintenance Department PERSONAL DETAILS: Date of Birth  25-11-1971 Marital Status:  Married . PROFESSIONAL MEMBERSHIP: Pakistan Engineering Council .COMPUTER KNOWLEDGE: MS Word, MS Excel, PowerPoint, AutoCAD

……………….………………………

Mechanical Engineer –SS003-08

 Mohammad Ather Abdul Warsi

 Father’s Name M. H. Warsi Date of Birth:01/06/1961 Marital Status: Married Religion:Islam  Nationality:Pakistani . ACADEMIC PROFILE :B.Sc (Mechanical Engineering) First Division, From University of Engineering and Technology (UET) Lahore in year of 1985. : H. S. C. (Pre-Engg) First Division from Karachi Board in the year 1978 :S. S.C.(Science ) Second Division from Karachi Board in the year 1976. PROFESSIONAL PROFILE : Compressor Operation & maintenance. Manager Safety Performance.Basic Secondary Spinning.Practical training Completed in PIA Engine-Overhauling shop Karachi. Maintenance Training in Karachi Shipyard and Engineering Works.On Job Training in Utility Section of Abbot Laboratories, Karachi. I.T. SKILLS :MS Windows,MS Office,Internet & Email,Auto CAD .ACHIEVEMENT / PROJECT COMPLETED : As a Graduate Mechanical Engineer, I started my carrier from ADAMJEE COTTON MILLS, Karachi, in 1984, as a TRAINEE ENGINEER in their A/C Area.For Broad spectrum / Multi experience, I quit from ADAMJEE Mills  and  joined a Local polyester Producing process industry called M/s National Fibers in 1985, as an Assistant  Manager  in   their   Utilities   Dept,   and    completed    successfully    my 1stDE-BOTTLE NECKING project over there with the collaboration of  M/s SAM YOUNG Co Korea. In 1991 I proceeded to U.S.A for further    Education in Advance  Engineering,  but joined Artesia Dying & Printing Inc.L.A U.S.A as Utility Engineer. In 1994–95. I returned back to Pakistan without    enhancement in   my Degree / qualification and joined local textile industry in Pakistan. During 20 Years of Technical Experience / tenure I had completed three major  projects in GREY & DENIM FABRICS from inception stages (LAND SCAPING) till Production Start up. After post Erection I was responsible for smooth operation of entire Utility dept. Including Power House and Work - shop in the vicinity.Currently working in LOCAL TEXTILE MILSS As General Manager Engineering. Responsible for all Engineering Activities. Tips of Project Completed,Complete Design & Installation of Power House, Boiler house, Chiller/ Humidification plant, Compressor house, R.O Plant , Effluent Treatment plants, Indigo dying , Sizing , Finishing etc. etc.Transportation of Stream/Condensate piping lay out is my subject of interest Searching for more grooming in Engineering aspects, since Engineering is said to be Devine. EMPLOYMENT PROFILE  : Above Ten years experience in Petro Chemical Plant, namely NATIONAL FIBERS LTD. (NFL) The main product of NFL are synthetic polyester Staple fiber + filament yarn through Batch process. I started my Engineering career as an Assistant – Manager & resigned as Manager Engineering Brief details of Job description/assignments are as under. ASSISTANT MANAGER (UTILITY) IN NATIONAL FIBRE. From January 1985 – 1988:Being as Engineer, my first assigned department was Utility department. In Utility Section   complete   engineering and engineering equipment was available for professional   growth. Initially   my job description was to check parameters and maintains the A/C section & accessories.As a shift engineer my duties, entailed man – Management of work force, proper utilization of   Man hour and logging of parameters/Events. The main target was predictive maintenance of plant hard ware in cooperation, with The Engineering Staff. DEPUTY MANAGER (UTILITY) IN NATIONAL FIBRE. From January 1989 – 1991:During my   tenure   as   a   Deputy   Manager. I was responsible of Operation and Maintenance of Utility Plant.Following assignments / targets completed successfully. Q.C of intermediate and final product. (Team Leader) In 1990 took active part in De-bottle necking project of fiber plant with the collaboration of Sam Yang Co, Korea.To improve quantity and quality assignment assisted UNIDO expert.Developed system under “Process Control Optimization” slogan. During expansion project under foreign principal, Coordinate / followed all the instruction of erectors, regarding flow operation and safety checks. Orientation of “Safety pobups and check program” design and implemented.Vigilance Manager duties ENGINEER WARE HOUSE (MECHANICAL) From January 1992-1994:In 1992 I proceeded to   United State    for further study I had joined Textile Mills, namely   Artesia dying & Printing Inc 1005 East Artesia, Blvd, Carson, California, U.S.A. as a   Warehouse Engineer, my job was to maintain, the Inventory level, check – in & check-out of engineering items according to their specification. Coordinate with floor and Engineering staff, & to maintain Data Book Technical Library / Manual etc. MANAGER (ENGINEERING) IN NATIONAL FIBRE. From 1994 – 2000:In 1994,   rejoined  NFL as Manager (Engineering) and was responsible for all Engineering aspects & maintenance of entire plant.Pin points of Job description are: Procurement and arrangement of all spares (local & imported)Preparation / planning and Execution of plant turn around. Annual Shutdown of whole plant job included, Evaluation / planning of  B.M.R.   (Techno-Economics)Dealing with consultants, contractors and Government institution.To manage and supervise contractors at site.Parity statement, Bid evaluation & awarding, technical specification, parts Inspection, inventory control, Bin cards system / warehouse inspection.Team member during annual audit of the factory.Arrangement of training facilities for junior Engineers & staff. SITE ENGINEER / INCHARGE HVAC From 2000 – 2002:In 2000, I joined YUNUS TEXTILE MILLS, LANDHI, As in charge Utility section, successfully completed erection of:CHILLER’S PLANT,A/C SYSTEM (LUWA),COMPRESOR’S HOUSE,POWER HOUSE,BOILER HOUSE After post erection, responsible of smooth operation of Entire Utility Plant PROJECT ENGINEER / MANAGER UTILITIES From 2002 – 2004:Join   NAVEENA TEXTILE (DENIM UNIT) During Job Tenure Successfully Completed erection of entire utilities section.   After post erection, Responsible of Smooth Operation of Utilities Section PROJECT ENGINEERING From 2005 – 2006:Join AFROZ TEXTILE (TOWEL UNIT) as Manager Engineering.  Responsible for all Engineering  activities Required in Towel Unit (weaving & Processing both). GENERAL MANAGER TECHICAL From 2006 – Till Date: Joined ADNAN APPREL, F.B Industrial Area Karachi as GM Tech, and Responsible for all Mills Activities.

……………….………………………

  Mechanical Engineer –SS004-08

MUHAMMAD AHMAD WASI    

Father’s Name:  Shaikh Muhammad Wasi Marital Status:  Married Date Of Birth:  14^th August, 1968 Work Summary  Most Recent 8 Years Mechanical Engineer … Application Engineer HVAC System Mechanical Engineer . HVAC System     

……………….………………………

Mechanical Engineer –SS005-08

MUHAMMAD ISHAQUE

Objective: A professional career in a competitive environment that demands excellence in performance and provide opportunities to attune professional growth based on the individual’s merit. Performance and capabilities.

Professional Experience:  2-years Professional Experience in Construction  / Commissioning in Oil & Gas Fields.

Education:

Poproject theses: HVAC of Automobile Air Conditioning Computer skills:AutoCAD 2004 and Mechanical Desktop.Project Planner Primavera (P3) Process (DCS, DPMS, MMS)Microsoft Excel,Microsoft Window. Professional Training: Training of CTMP (Construction, Technology , Management & Planning) from Descon Engineering Ltd at Head Office P3 Course from Head of  Descon  Ltd Personal Information: Father’s Name:Muhammad Ayoob. Date of Birth:August 26, 1982  NIC.No.41308-3812725-9  Nationality:Pakistani Professional Experience: EMPLOYER: Descon Engineering Limited PROJECT: BHP BILLITON (ZAMZAMA PHASE 2 HCV DEVELOPMENT)  POSITION: Area  Planner of (Piping , equipment and Structure) DURATION: September, 2006 to –to date  (Presently  working) Responsibilities: - Involved in execution activities of piping & Steel Structure Fabrication and erection.Estimation of manpower requirements, histogram, s-curves.Preparation/update of projects schedules, progress reports, follow-up sheets, task orders, check lists, work breakdown structures, flow charts and progress curves.Coordination of project activities with different departments, suppliers and subcontractors.Prepare the detailed schedule for the project, including time schedule, resources schedule, and plant schedule.Collect data through site visits and prepare status.Analyze the projects status and set the corrective action needed. Prepare the organization chart & mobilization schedule for project. Prepare weekly & monthly reports for the project. Monitoring projects’ actual progress and cost. Preparation of monthly statements and invoices. Work with the Discipline In charge for preparation of daily and weekly schedules based on, 4-week and three months look ahead plans.Distribute daily, weekly and Monthly Targets to Discipline Engineers.Roll up area wise plan on weekly basis and monthly basis to regenerate the forward planning In Primavera Project Planner.Plan out the daily job on supervisor level as per the work front availability.Monitor and analyze various aspects of progress of all activities on daily basis with the implementation of Daily Schedule & Time sheet. Closely watch booking of man-hours in appropriate and correct cost centers in Daily Schedule & Time sheet.Cold and Hot Insulation ( Nitrogen Removal Unit ) as a Execuator EMPLOYER:Royal Engineering Ltd PROJECT:Attock Oil and Gas Refinery POSITION:Area Planner  DURATION:December, 2005 to July 2006 Responsibilities: - Planning & Scheduling of Equipement, Piping & Strcutre.Coordination with Client regarding equipement , piping and strctrue & Execution work.Estimation of manpower requirements, histogram, s-curves.Prepare the detailed schedule for the project, including time schedule, resources schedule, and plant schedule.Collect data through site visits and prepare status. Prepare weekly & monthly reports for the project. Monitoring projects’ actual progress and cost. Distribute daily, weekly and Monthly Targets to Discipline Engineers. Roll up area wise plan on weekly basis and monthly basis to regenerate the forward planning In Primavera Project Planner. Plan out the daily job on supervisor level as per the work front availability.Closely watch booking of man-hours in appropriate and correct cost centers in Daily Schedule & Time sheet.

……………….………………………

Mechanical Engineer –SS006-08

MUHAMMAD REHAN ALI

CAREER OBJECTIVE :Keen to achieve a career in a leading, progressive and demanding organization providing ample growth and learning opportunities with an aim to contribute positively towards its goal to the best of my capabilities. ACADEMIC QUALIFICATION Bachelor of Engineering (MECHANICAL) passed with 1^st Division, 70.7% marks from NED University of Engineering & Technology  (2002-2005): Intermediate with Pre-Engineering, Passed with Grade -A, 74.8% marks from Govt. Delhi college  (1999-2001):Matriculation with Science, Passed with Grade -A, 79.7% marks from Gulshan Cambridge school  (1997-1999). PROFESSIONAL EXPEREINCE Presently working in MAPAK Qasim Bulkers (Pvt.) Limited as a Terminal Maintenance and Project Engineer since September, 2006. Responsibilities: Prepare feasibility for the upcoming Projects for Management review.Coordinate with Contractors, materials procurement, verification of invoices, financial monitoring and supervise works of on-going Projects like Erection of piping, Construction/Fabrication of Storage tanks, Sand Blasting, Painting, Welding, Calibration and Hydrotesting of Tanks and prepare progress reports.Prepare BOQs, Cost estimation, Review and evaluation of Bids. Maintain records and carry out preventive maintenance of Pump, Compressor, Boiler and Generator. Worked in Gatron Industries Limited as a Trainee Engineer (Maintenance) in Spinning department for 08 months (i.e. Jan – Sep, 2006) SKILLS Familiar with API Standard 650 and P&Ids,Auto CAD,MS Office PRACTICAL TRAINING:Analyzed production, workshop practice, shutdown operations & plant maintenance at  National Refinery Limited, NRL  (June-July, 2004) FINAL YEAR MECHANICAL PROJECT:Design of Hydrogen Generation System using solar energy. PROJECT DESCRIPTION:Electricity is generated by means of photovoltaic cells.Electricity generated is utilized for hydrogen production by electrolytic cell.The system includes the selection of appropriate photovoltaic cells, electrolytic cell, pumps & compressor. It also includes the designing of piping system, storage tanks & supports. PERSONAL INFORMATION Father's Name: Muhammad Salman Date of Birth:27^th September – 1983  N.I.C #: 42201-1552296-7  Place of Birth: Karachi  Marital Status : Single Languages: English, Urdu Religion: Islam

……………….………………………

Mechanical Engineer –SS007-08

KUMAR KHATRI                        

OBJECTIVES :To work in a progressive field, where by I can use my abilities and knowledge to future my career aspiration. Seeking the position of mechanical field to utilize my potential and enhance technical skills in a progressive and goal oriented organization.

Father’s name: Dev Kirshan Khatri Qualification: B. E( Mechanical) .Experience:  6   years in processing textile sector Date of birth: 02-04-1974 .NIC no:  42201-2748326-5

Academic Qualification

Matriculation:1990 A Grade   , Intermediate:1992  A Grade , B .E Mechanical:  2000 2^NDDivision                                                   Final Year Project :Maintenance of machinery in weaving section of Fateh textile mills Hyderabad. Experience: From December 2006 in AL-ABID Silk mills Karachi  (as a mechanical engineer ) 3 years in Rauf textile and printing mills Karachi  (as a maintenance engineer) One year in Dalal industries Karachi  (as a maintenance engineer) Six months in A.M textile mills Kotri  (as a trainee maintenance engineer) Six month in Fateh textile mills Hyderabad (as a trainee maintenance engineer)  Technical Skills   Experience in rotary equipment ,electro pneumatic and hydraulic system Experience in documentation of preventive ,corrective and predictive maintenance  Experience in plumbering,fabricating and manufacturing shop work Experience in heat exchanger and cooling towers  Experience in reciprocating and centrifugal pumps  Experience in design and installation ,project work of steam,air,chemical, water, and gas piping works. Maintenance and Operational Management Skills   Responsibilities of wet process textile machines  of boiler house ₊ of air generation  Responsibilities of R. O Plant + of waste water treatment plant +  of fire fighting system + of health, safety and environmental  system  + of preventive ,corrective and predictive maintenance + of tools and spare parts inventory controlling. + of department shifts schedules. +of project,mini project and Planning. + of drainage system +of daily reports to G M Maintenance. Technical Skills in Machine Erection & Civil Work :Kusters padsteam dyeing machine 2004 PLC  (Germany) Osthoffsenge machine 2004 PLC based (Germany) Laffar peaching machine 2004 PLC based (Italy) ILGI screw air compressors with air drier and line filters.Beiger mercerize machine 2005 PLC based(Germany) Jacquard machines in looms shade (Switzerland) Computer skills  Knowledge of MS Operating system and MS Office.

……………….………………………

Mechanical Engineer –SS008 -08

NOMAN YOUNUS                          

Father  Name  :  Mohmmad  younus

B.E MECHANICAL ENGINEERING N.E.D UNIVERSITY  OF ENGG & TECH 1993-97  DIPLOMA:(SOFTWARE  COMPUTERS  PETROMAN INSTITUTE) ( 1996-97) AUTO CAD:SHORT COURSE  2000-2001  ISO 9002:PHILIPS ELECTRICAL INDUSTRIES 1998-99 ISO 14001:PHILIPS  ELECTRICAL INDUSTRIES   2000-2001 EHS/HSE:GLAXO-SMITH KLINE  PAKISTAN  2002-2003 DOE:PHILIPS ELECTRICAL IND  2000-2001 SPC: PHILIPS ELECTRICAL IND    2001-02  KAIZAN APPRAOCH:PHILIPS ELECTRICAL IND 1999-2000 LEAN SIGMA: GSK  2002-03 JDE /BPCS:PHILIPS ELECT IND /GSK  2002-03 PRIMAVERA :EMIRATES NEON 2003-04

CURRENT-EMPLOYER : TOYOTA – INDUS MOTORS PAKISTAN (DEC 2004 till DATE )MANAGER PROJECTS & PLANNING:  EX-EMPLOYER:  EMIRATES NEON.CO.L.L.C SHARJAH UAE . Feb  2003  TILL  September 2004at   UNITED ARAB EMIRATES (ShJ). DEPUTY   MANAGER PROJECT & PLANNING  Ex-EMPLOYER : GLAXO-SMITH KLINE   (GSK )(February   2002  TILL  January 2003)MAINTENANCE ENGINEER E:X - EMPLOYER:PHILIPS ELECTRICAL  INDUSTRIES   PAKISTAN   10^TH  JUNE 1998  TILL   30^th August 2001 PRODUCTION ENGINEER   (GLS / TL FACTORY ) Job  Title : DEPUTY   MANAGER PROJECT & PLANNING   ( P.E ) .   Department:PROJECT / PLANNING /PRODUCTION Reports  to : GENERAL MANAGER .Interface  With :   QC  , Production Dept. ,  Logistics , Accounts. Purchase . Finance Reportees: 12  Engineers   , inhouse  Contractors , consultants , Vendors Job Description Supervising   power  generation / co-gen project  of  5 MW /    700 Million PKR Supervising New Bumper Booth  painting  line  146 Million  PKR  Supervising Pre-Engg Building  system , civil foundation work , Road  works , Compresses  Air  system ,  Boiler  , Fire  Fighting  works , Jigs  fabrication, ducting . Prepares technical proposals for products including a description of the proposed equipment, , performance,  reliability, materials and other data required to satisfy customer specifications Assumes complete program responsibility under the guidance of a General Manager   for proposals and projects assigned. Coordinates with the representatives of ,Customer Manufacturing, Quality, and Purchasing to plan and develop programs.Participate in scheduling of engineering and drafting activities. and BOQ /BOM .  Perform calculations in accordance with the approved procedures, assist in developing and maintaining project specifications and drawings and prepare estimate spread sheets for project costs as required.

Maintains technical liaison with customers and vendors working through the  Purchasing Departments. Prepare or assist the Lead  Technical Professional in preparation of construction scopes of work Establish & Maintain  Piping & Ducting system ,Heating  Ventilation & Air Conditioning System (HVAC) Responsible for Maintenance & operation of Centrifugal Pump, Valves, Compressors , Chillers  , Cooling Tower ,  Heat Exchanger .Recruited, trained, led and motivated personnel with diverse skills and from different functions..  Executed audits and evaluated operational performance. Recommendations led to performance cost and   manpower improvement programs.JUNE 1998- August 2001  :    (PHILIPS  ELECTRICAL  INDUSTRIES ) Job  Title: PRODUCTION  ENGINEER   (GLS / TL FACTORY ) Department :General Light Section   Production  , Business  Group  Lamps Reports  to : PRODUCTION   Manager /  Factory   Manager.Interface  With :QCD  , MMD , Services , Plant  Engineering  , Accounts., Services . Reportees:04  Production  Supervisor  ,  60  operators  ,  03   Technicians ,  01 Electrician  Job Description: Responsible for production of shift wise targets OF GLS Lamps. The monthly targets are to produce  five million lamps  from four production lines with team of  60 operators and 4 production supervisors in a shift. Working  knowledge  of  PLC  , Planing    production   schedules , Preparing    department  budget. Exercise of quick decision making while managing the shift production. Using the best results in Asia Pacific region Philips factories as a benchmark to bring a turn around in factory results.  Implementation of Design of experiments( DOE) concepts to identify and address the root cause of chronic and recurring production problems. Training of operators to maintain the process through Statistical Process Control tools (SPC) and Design of Experiments ( DOE) Use of BEST (Business Excellence Through Speed and Team Work) Manufacturing Concept. Implementation of ISO 9002  and  ISO 14000  Quality Management System.

……………….………………………

Mechanical Engineer –SS009-08

                                                                                                                                                                                                        SAIFULLAH

Objective To get position as an outstanding Mechanical Engineer in a dynamic and progressive organization offering sample opportunities for diversified exposure, enhancement of my professional skills and career growth. Personal S/O      Shuhabuddin  D.O.B:11-07-1982  Single  Muslim  Pakistani C.N.I.C# 41301-7444286-5.Education: B.E Mechanical,   2006 (1^st Division) Intermediate, 2^nd division, year 1999,  from B.I.S.E Hyderabad. Matric, 1^st division, year 1997, from B.I.S.E Hyderabad. Computer Skills  Auto CAD 2006  MS Project and Office   Windows 98, X Internet & e-mail. PROFESSIONAL AFFILIATION Member, American Society of Mechanical Engineer, New York. Member, Pakistan Engineering Council, Islamabad. TECHNICAL training 4-Weeks Internship at Pakistan International Airlines (P.I.A) Karachi. 4- Weeks Internship at Jamshoro Power Company (JPCO Thesis/Project Thesis on “Major Hazards Control in Oil Fields of Pakistan”.

……………….………………………

Mechanical Engineer –SS0010-08

SHAHAN NAFEES

Persona-Details: Marital Status: Single, Date Of Birth:06-July-1981 Nationality: Pakistani,   Language: English OBJECTIVE:To use my knowledge and engineering skills for serving mankind and to earn a contented and honest life to enter in professionals’ life in order to apply various technical, management and other skills acquired during the academic career .EDUCATIONAL DETAILS: Education:B.E (Mechanical): Division: First Division.: University: Ned University Of Engineering & Technology, Karachi, Study Period: January 1999 To February 2003 ENGINEERING PROJECT: Design of a Gas Engine Plant of 5KW Using Bio-Gas Under the Supervision of Engineer Ismat Ali, Principal of  Fuel Research Centre (FRC) Pakistan Council of Scientific & Industrial Research (PCSIR) Karachi, Pakistan. WORK EXPERIENCE:Duration:24^th July 2003-to Date: Company: Simcon International (Pvt.)Ltd.Designation:Deputy Manager.:Department: Design & Engineering Department :Nature Of Job: Management Of All Cad/Cam Based Designing And Manufacturing Projects For Automotive Industry.TECHNICAL SKILLS:3D Solid and Surface Modeling, 3D Assembly Modeling.,3D Scanning.,Designing of Plastic Molds, Sheet Metal Dies, Pressure Die casting Dies, Jigs & Fixtures.,Rapid Prototype Development.,Supervision of all Manufacturing Projects.,2-D Drafting, Detailing and GD&T.,NC tool path generation with reference to CAD model.,Project planning.,System administration & implementation.,Team building &monitoring.,Trainings of CAD/CAM software, CNC machine programming & operation. PROFESSIONAL PROFILE:A result oriented professional with over 4yrs of rich & dynamic CAD/CAM experience. Adept CAD/CAM operations involving  3-D Modeling, Drafting,Manufacturing & Assembly Design.Possess understanding of Engineering Drawings & Layouts oriented with Manufacturing applications.Excellent communication skills with co-ordination, troubleshooting, Problem defining & solving capabilities and skills in solving technical issues related with CAD/CAM.Besides of CAD/CAM, experience in Inspection and Quality Control.APPLICATION SOFTWARE:Proficient in high end CAD/CAM/CAE softwares given below in detail with modules.Unigraphics NX4:3D Solid & Free Form Modeling, Advance, Assembly ,Mold, Wizard, Sheet, Metal, CAM, Motion, Solid.Edge.V.19: 3DModeling,Sheet,Metal,Advance Assembly,Drafting.NX CAM Express:Turning.,3 Axis Machining.,High Speed Machining.,Machining Simulation.,Programming Automation.,Customization of CAM Wizard., Customization of Post Processor.,Customization of Shop Documents.Image Ware:Rapid surfacing,,High-quality surfacing,,Reverse engineering,,Computer aided verification,,Polygonal modeling,Rapid prototyping .Pro-Engineering 2000i:3D Modeling,Drafting,CAM Vericut V.5.2:Simulates CNC Machining,Optimizes NC Program Cutting Speeds.Master CAM V.7:CAM.AutoCAD R-14:3D Modeling,2D Drafting.Auto Form:Die Designer,Blank Designer. Fast Blank:Surface Output of the Blank for Sheet Metal Parts.,Unfolds Compound Bends as well as Draw Sheet Metal Parts & formed parts.PROFESSIONAL TRAININGS:Completed satisfactorily four Weeks’ training (From February 2003 to March 2003) of Specialized Professional Course in ,Computer Aided Manufacturing (CAM) conducted by Precision Mechanics & Instrumentation Training Centre Karachi, including the following Course Contents:Work Coordinate System,CNC Machine Programming ,Drawing Editing,CNC Machine Operation.,Completed satisfactory two days’ training of Productivity Improvement conducted by AutomotiveTesting & Training Centre Ltd.Completed satisfactorily four days’ training (From 30^th Oct. To 2^nd Nov.) of Specialized Professional Course in Computer ,Aided Designing (CAD) From ECSS (Engineering Computer Services Singapore) conducted by Unigraphics Solutions Singapore, including the following Course Contents: Solid Edge Fundamentals.,Advanced Assembly,Sheet Metal. AWARDS AND HONORS:Certificate awarded by Chairman of SIMCON International (Pvt.) Ltd. for my overall outstanding performance.Certificate awarded by Principal Engineer Ismat Ali of Pakistan Council of Scientific & Industrial Research on the dedication of final year engineering project.

……………….………………………

Mechanical Engineer –SS0011.08

ENGG. SYED  HABIBULLAH  HUSSAINY

SUMMARY OF QUALIFICATIONS: Experience includes diverse managerial skills in project management,execution,installation,erection,operation and maintenance of  Plant & Machinery. Experience includes preventive & sheduled repairs of Diesel Hydraulic Locomotives, Railway Wagons, special Rolling Stock, Steel Mill’s Hot-Metal & Slag Ladle-Cars. Experience of organising different type of repairs at various complexes of Steel Mill. Experience in planning & organising the shift working in emergencies.Established training programs for Staff & Workers to attain organization's objectives with initiative & motivation. EXPERIENCE: a.) Engineering experience of  22 years in PAKISTAN STEEL: As a member of Project Execution & Management Cell of Pakistan Steel, One year experience for the execution,erection and installation of steel Structures & Mechanical equipments of “ Converter Slag Processing Plant", as Manager/In charge Mechanical. Now this Project is in operation.(May,1999 to June 2000)One year as Manager Mechanical) in Central Maintenance Department for the execution, erection and installation of “Scrap Baling Press’’ at Scrap Shop of Cold Rolling Mill. Now this project is also in operation.(1998 – 99)Three years as Manager (Mechanical) in Central Maintenance Department. Responsible for the preventive and schedule repairs of Hot-Strip, Billet Mill and other complexes of Pakistan Steel. Also responsible to plan shift working during emergencies.(1995 – 98) Eleven years as the In charge Maintenance of Heavy and special Rolling Stock of Railway Department of Pakistan Steel. Responsible for the maintenance of Slag and Hot- metal Ladle Cars.(1984–95)Two years as“Asstt.Supdt.’’for the maintenance of mechanical equipments in Locomotive Repair Shop of Pakistan Steel.  (1982-84)Two years as“Asstt.Supdt.(Mech)’’in Railway Department of Pakistan Steel. Responsible for the repair, maintenance and operation of Locomotives & wagons.(1980-82Two  years  as “ Asstt. Executive Engineer.(Mech)’’ in Railway Department of Pakistan Steel. Responsible for maintenance of Locomotives. (1978-80)(b.)Engineering experience of  7 years in  M/S  SYNZR  INDUSTRIA CONSTRUCTION  ENGINEERS as Senior Manager(Mech.).Experience of maintenance,project management,execution,installation and erection of Plant & Machinery with effect from 15-8-2000 to 07-5-2007 (After the experience of 22 years in PAKISTAN STEEL).EDUCATION:B.E (Mechanical) from NED University Of Engineering &Technology, Karachi in FIRST Division.B.Sc. (Pass) from Karachi University in FIRST  Division. Major Subjects---Physics, Statistics & Mathematics) Inter Science (Pre. Engg.) from Karachi Board in FIRST Division. Matric (Science) from Karachi Board in FIRST  Division. Post-Graduate Education:MBA (Marketing) from AIOU, Islamabad. Have passed all 24 subjects. The Degree will be awarded after the submission of a “Report” on the marketing activities of any selected organization). FOREIGN TRAINING: Six months in U.S.S.R in the field of “Repair &Maintenance of Diesel Hydraulic Locomotives” upon the   recommendation of Pakistan Steel. (1978-79)COURSES / SEMINARS: Three months course on “Operation & Maintenance of steel plant power equipments” held by Training & Manpower Development Department of Pakistan Steel. Five days course on “Industrial Safety & Accident prevention' conducted by the Safety Department of Pakistan Steel. The following courses/seminars conducted by the Management Development Center of Pakistan Steel: Participated Five days course on “Managerial Skills Development". Participated three days course on “Effective Communication Skills”. Participated two days seminar on" Shop Floor Labor Laws” .PROFESSIONAL AFFILIATIONS: Life  member & Registered Professional Engineer of Pakistan Engineering Council. Member of The Institute of Engineers,Pakistan.AVAILABILITY: After one month, Availed Voluntary Retirement Facility of Pakistan Steel with effect from 13-06-2000 in the age of  48 years due to my own circumstances and served M/S Synzr Industrial Construction Engineers as Senior Manager (Mech.) with effect from 15-8-2000 to 07-5-2007.Now temporarily engaged in KEN LUBES  International  Karachi as In charge  Technical  services. MARITAL STATUS: Married person with sound health and physique. RELEVANT DOCUMENTS: Will be furnished at the time of interview.

……………….………………………

Mechanical Engineer –SS0012-08

ANSAR UL RASHID

Objective:POSITION AS MANAGER TECHNICAL/ OPERATION : Highlights of Qualifications Bachelor Degree in Mechanical Engineering from NED University of Engineering & Technology in 1978. Diploma of Associate in Mechanical Engineering from State Technical Board Bihar in 1967.Good communication skills and Technical skills in Engineering disciplines to present solutions to times and resource for major projects.Positive professional attitude, committed to Quality, Safety and progress.Attended several courses in PAKISTAN INSTITUTE OF MANAGEMENT SCIENCE for management skills. SummaryOver 30 years of international and national supervising experience  in  construction and project management ,cost engineering material and bid evaluation and procurement, making technical and commercial proposal, claim settlement in petro chemicals industry. Erection, commissioning and Maintenance of mainline, transfer and flow lines, oil production facilities, loading and unloading stations pumps as per API, ANSI, BS and other relevant standard and procedures. Experience: Sagri Associate & Consultant.December 03, 2005 to October 2006(Project Manager) Supervision of 5000 M.T and 2500 M.T.  storage  tank construction and 10” dia &  6” dia piping from Edible oil PQA jetty to station and construction of office and pump & 400 KVA Generator House, For MUJAHID OIL TERMINAL at PORT QUASIM .Pipe link P/L Construction Co (PCL)September 2004 to july 2005(Project Manager) Responsible for Construction of well head piping and flow line for gas field for OMV Pakistan Ltd Kadanwari gas field area. And fabrication of all steel structures. Techno Engg & Construction Co:April 2003 to march 2005(Project Manager /Section Incharge)Responsible for construction, hydro testing and commissioning of 26”dia pipeline 860 KM pipeline from Karachi to Muzaffargarh Gujrat.for PAK ARAB REFINARY Ltd. TOTAL Engg & Inspection Co,Karachi:(June2002 to January 2003) (Manager/Inspection)Overall Incharge of Inspection of Polyethylene coating 16”dia 2000 nos pipes at Crescent pipeline Mill at Nooriabad for CLOUGH ENGG AUSTRALIA LTD.for Sawan gas field. Pak Arab Refinery Limited:April 1988 to January 2002(Senior Mechanical Engineer)Responsible for supervision /Project management of 30”dia oil tanker crude unloading line from BOP-1 (Jetty) at Keamari and Bulk storage tanks (floating Roof Type) Development of export facilities for Motor Gasoline at Keamari Maintenance of 16”dia cross country pipeline by Pigging & by sleeving. Supervision of DKF Project by addition of 50,000 MTstorage tanks (fixed Cone Roof Type) at korangi Commissioning of PARCO 16”dia and 8dia mainline & spur line Karachi to Gujrat and from NRL/PRL TO Korangi Laying of 1.5 KM 20”dia unloading line from parco Kiamari to 18”dia transfer line to Korangi Installation of additional 500 HPGoulds Pump at Keamari Terminal ENAR Petro -Tech Services (Pvt) Ltd:1985 to 1988 (Mechanical Engineer)Responsible for bid evaluation of technical and commercial proposals submitted by contactors.(Resident project Engineer)Incharge of laying 8dia product transfer line from Attock Refinary toPSO Station at Sihala. Tamimi,Fawad Reading & bates co (Saudi Arabia):1983 to 1985.(Sr.Mech Engineer)Responsible for making Technical and Commercial Proposal and bid costing for several pipeline project for ARAMCO, SAUDI ARABIA. Pak Arab Refinery Limited:1979 to 1983.(Mechanical Engineer)Responsible for almost all pipe line  laying activities such as stringing, ditching ,welding, coating , laying , hydro testing ,Tie-ing  back filling, and commissioning of 16”dia 864 KM mainline from Karachi to Muzaffargarh. Shift Engineer In charge of running of Pumping Station at Korangi for smooth operation. People Enterprises Ltd:1978-1979.(Mechanical Engineer) Responsible for fabrication of steel structures like beams , girders and trusses etc for  Pakistan steel Pvt .Ltd. NOTE: More than5 years working experience in EPWAPDA as Sub Astt Engineer, Mechanical after obtaining Diploma in Mech engineering. Professional AffiliationsMember Pakistan Engineering Council (Life Member ) Member Institute of Engineers .References Syed Zakir Hussain Shah (General Manager / PARCO) ,Noor Muhammad Chandio (General Manager / ENAR)

       ……………….……………………

Above These we have more CV,s